Chapter 2 Basic Library Operations
OCP Components
Quantum PX500 Series User’s Guide
79
a
To enable/disable DHCP, press
Yes
to enable DHCP or
No
to
disable DHCP. If your library is not connected to a network
which uses a DHCP server to assign IP information, disable this
function
b
To set the IP address, subnet mask, and gateway, use the up and
down arrows to select the appropriate number and press
Enter
to
accept.
3
When you are finished viewing/editing the network information,
press
Exit
to return to the
Setup
screen.
Date and Time
2
To view or edit the date and time information:
1
From the
Setup
screen, use the up and down arrows to highlight
Date
and Time
and press
Enter
.
The
Date and Time
screen displays (see
Figure 53 Date and Time
Screen
2
Use the up and down arrows to view or edit the date and time
information. Press
Enter
to advance to the next choice. After you have
edited the final setting (seconds), press
Save
to accept the new
settings.
3
When you are finished viewing/editing the date and time
information, press
Exit
to return to the
Setup
screen.
Note:
For the network information such as the IP address to be
active, the library must reboot. To reboot the library, see
