Quantum ATL P7000 Unpacking Instructions
Document 6434006-02, Ver. 2, Rel. 0
August 2002
16
Unpacking the Library
Figure 17 Rolling the
Library Down the Ramp
8
Guide the library to its final installation site.
Unpacking the Library
0
To unpack the library:
1
Using the power cable from the accessory kits, connect the library
to a grounded power source.
2
Unlock and open the library doors:
a
Using the key from the accessories kit, unlock each door.
b
Lift each door handle straight up and then turn the handle to
unlatch each door.
c
Gently pull on each door handle to open the door.
3
Remove the foam pads from inside the front doors and around the
robotics.
4
Remove the shipping plate that protects the load port (see
Note:
Do not turn on the library.
Note:
Save the bolts, washers and shipping plate to use in
repacking the library.
