Chapter 4 Service Commands
Testing the Library
82
Quantum P4000 and P7000 Libraries User’s Guide
Performing a
System Test
4
To perform a system test:
1
From the
Service
screen, press the
SysTest Library
button.
The
Test: SysTest Library
screen is displayed (see
).
Figure 48 Test:
Systest Library Screen
2
Select one of the following system test options:
• Swap Bins - test storage bins only
• Swap Drives - test drives only
3
Select all desired test options as follows:
• Random - swap cartridges at random
• Use Barcodes - read barcode as cartridges are swapped
• Continuous - repeat test until aborted
Note:
The
Continuous
button must be de-selected to enter “# of
Runs”.
System
Off-line
Standby
Load Port
Back
Forward
Home
S
Test: Systest Library
Select
Execute
Use
Barcodes
9
0
7
8
5
6
3
4
1
2
Stop
Random
Swap
Bins
Swap
Drives
_
Continuous
# of Runs:
Service
Tapes
Operator
About
