Quantum ATL 4000 Library Unpacking Instructions
Document 6434005-02, Ver. 2, Rel. 0
August 2002
24
Unpacking the Library
Figure 25 Storing the
Shipping Restraints
2
Slide the two ramp extensions into their shipping position on top
of the pallet.
3
Secure the ramp extensions with the foam block.
4
Re-insert the wooden bar into its brackets on the pallet.
5
Fold the shipping bag.
6
Place the shipping bag, load port shipping plate, stop blocks, foam
cap, screws, and other packaging materials on the pallet.
7
Collapse the cardboard box.
8
Place the cardboard box on top of the packaging materials on the
pallet.
9
Secure the pallet, packaging materials, and cardboard box for
future use.
Leveling the Library
0
To level the library:
1
Rotate each foot of the library until it makes contact with the floor.
2
Rotate each foot an additional 1/4 turn clockwise with the open-
end wrench to begin raising the library.
3
Center a carpenter’s level on the top front edge of the library.
4
Check the gauge on the level. If the front of the library is level,
. If it is not level:
Label with shipping
restraints outlined
