Quantum ATL 4000 Library Unpacking Instructions
Document 6434005-02, Ver. 2, Rel. 0
August 2002
22
Unpacking the Library
Figure 23 Removing the
Gripper Restraint
d
Remove the gripper restraint by gently pulling it back toward
the vertical axis.
e
Slide the gripper assembly toward the vertical axis.
9
Remove the vertical carriage restraint (see
):
a
Rotate the extension axis assembly 90 degrees.
b
Remove the screw that secures the vertical carriage restraint to
the vertical carriage.
c
Gently lift the vertical carriage to eye-level.
d
Squeeze the two sides of the vertical belt together, making sure
to interlock the belt cogs.
e
Secure the vertical belt with a tie wrap.
f
Remove the two screws that secure the vertical carriage
restraint to the horizontal carriage.
g
Remove the vertical carriage restraint.
h
Remove the tie wrap installed in
i
Gently lower the vertical carriage.
Warning:
The vertical carriage is extremely heavy.
Gripper assembly (fully extended)
Gripper restraint
Extension axis
assembly (top view)
