Quantum ATL 4000 Library Unpacking Instructions
Document 6434005-02, Ver. 2, Rel. 0
August 2002
Unpacking the Library
13
11
On the right side of the library, unscrew the bolts that secure the
hold-down brackets. Each hold-down bracket is secured with two
bolts .
12
Remove each hold-down bracket from under the library (see
), using the supplied wrench.
Figure 11 Removing the
Stop Blocks
13
Re-insert the left-side wooden bar in its brackets on the pallet to
hold the library in place.
14
Repeat steps 10, 11, and 12 for the right side of the library. Do not
replace the right-side wooden bar.
15
Slide out the two ramp extensions and the foam block, all located
under the library on the right side (see
).
