Quantum Management Console 4.4 User Manual Download Page 83

Page: 83 / 120

ADIC Management Console User’s Guide

Installing the Host Registration Service for HP-UX

Install this software on a host computer running the HP-UX operating system that is attached to an SNC,
MCB or network chassis.

Verify that the HP-UX host you are configuring has an installed Host Bus Adapter (HBA).

Obtain HstRegSrv.depot from your service representative.

From the command line type

sam

and press

Enter

Select the

Software Management

menu, then select

Install Software on the Local Host

After

Source Host Name:

type your host’s name.

After

Source Depot Path:

type the name of the directory that contains the *.depot file.

Type the full file name,

HstRegSrv.depot

Select

Select the

Action

menu, then select

Install (analysis...)

At the confirmation window select

Yes

Select

Done

when Installation completes.

HRS is located in

/usr/contrib/bin

Reboot.

Optionally, change the re-registration period, by typing

hrs -i[interval in minutes] -D &

and press

Enter

This causes HRS to run in the background as a daemon, registering at the specified time interval.

The default re-registration period is 5 minutes.

Installing the Host Registration Service for AIX

Install this software on a host computer running the AIX operating system that is attached to an SNC, MCB
or network chassis.

Verify that the AIX host you are configuring has an installed Host Bus Adapter (HBA)

Obtain

HstRegSrv.bff

from your service representative.

From the command line type

smit

and press

Enter

Select the

Software Installation and Maintenance

menu,

point to

Install and Update Software

Then

select

Install and Update Software by Package Name (includes devices and printers)

Type the path to the

HstRegSrv.bff

file

at the command prompt, or select the

List

button on the right

side of the screen to select this file.

If you are entering the path, be sure you include the

HstRegSrv.bff

as the file name.

When prompted to

Select Packages to List,

select

package

When prompted to

Select Software to Install

, select

1.13.0.0 ADIC Host Registration Service

Summary of Contents for Management Console 4.4

























































































































Search results

Summary of Contents for Management Console 4.4

Reviews:

Related manuals for Management Console 4.4

Brands by name

Popular brands

Quantum Management Console 4.4, User Manual

Search results

Summary of Contents for Management Console 4.4

Reviews:

Related manuals for Management Console 4.4

Brands by name

Popular brands