Installing the LTO Driver Software
15
Product Line
Installing the LTO Driver Software
Note:
The LTO-3 (Model B) tape drive can ONLY be used with the LTO-3 (Model B)
drivers and firmware. To obtain the correct driver and firmware, visit
http://
www.quantum.com/ServiceandSupport/Index.aspx.
If you intend to use the LTO-3 (Model B) Half-Height Tape Drive with the Microsoft
®
native backup applet on a Windows 2000, Windows Server
®
2003, Windows XP
®
, or
Windows Vista operating system, install the appropriate version of the LTO driver
software. (See the Downloads page for LTO-3 (Model B) drivers under Standalone Tape
Drives on the Quantum support website at:
Note:
The LTO driver software is not necessary with commercial backup application
software.
Registering the LTO-3 (Model B) Half-Height Tape Drive
After installing the LTO-3 (Model B) Half-Height Tape Drive, be sure to register it via the
Quantum website at:
Registering the drive ensures that you will receive the latest technical information about
the drive, as well as other product, service, and support information.
Safety Compliances
The LTO-3 (Model B) Half-Height Tape Drives are safety compliant with the following
regulatory organizations and codes in the countries indicated:
Country
Regulatory Organization
Compliant to:
Canada
Canadian Standards Association
(CSA)
UL/CSA 60950-1
EU member nations
Comité Europèen de Normalisation
Electrotechnique – the European
Committee for Electrotechnical
Standardization (CENELEC)
EN 60950-1, 1st
edition
