Page 2
GENERAL INFORMATION
SHOWN WITH LEAD ACID BATTERY
To Remove Directional chevrons-
Remove colored panel and push chevron out for
desired configuration.
DC Connection-
Connect battery to lamp board
AFTER AC power can be continuously provided to exit.
To Remove Face Plate-
Press in snaps at bottom or top of housing to separate
face plate from housing.
Remove and Relocate Lamp Mount Assembly
Remove face plate and back plate.
Disconnect lamp harness from lamp board.
Press four snaps (two each side) to release lamp
mount assembly from housing. Relocate to top of
housing and resnap into place. Connect lamp harness
to lamp board.
To Remove Lens and Change Lamps-
Release lens bylifting outward and over button with
thumb. Replace lamp with an identical lamp.
To Remove Back Plate-
Press in snaps at bottom or top of housing. Then
release latches A and B from the inside of housing.
To Remove Canopy-
Rotate cam locking pin level with housing and remove
from hooks. Squeeze snaps and pull housing free.
A
B
C
D
E
F
G
