Chapter 4: F2000 Customer Replaceable Units (CRUs)
Rack Rails Replacement
Quantum F2000 User’s Guide
155
Figure 162 Quantum F2000
Bezel
Remove the Chassis from the Rack
To remove the failed chassis:
1
Locate the black screws that are installed below the thumbscrews
on the front of the chassis. There is one screw on each side of the
chassis.
2
Remove screws from the Rails using a #1 Phillips screwdriver (see
Figure 163 Black Screws
on
the Front of the Chassis
3
Locate the thumbscrews on both sides of the chassis.
