1
2
3
Disconnect battery from charger board.
Release battery strap.
BATTERY HANDLING WARNINGS:
•
Dispose of used batteries promptly.
•
Keep away from children.
•
Do not disassemble.
•
Do not dispose of in fire.
BATTERY REPLACEMENT
Unit features and battery details shown may vary. See also “Battery Connection”, page 3.
LAMP REPLACEMENT
page 5
TESTING and MAINTENANCE
With the unit oriented as in the below
view, flex the channel at the left end
of the charger board outward to
release and remove it. Unplug the
battery and other connections. See
“Lamp Replacement” above, to
disconnect the lamp wires from the
charger board.
CHARGER BOARD REPLACEMENT
Replace battery, secure the strap
snugly, and reconnect to the charger
board.
Re-assemble the unit (see also
step 5, page 3).
1
2
3
Remove lamp bezel as shown
below.
Gently bend the snap at each side of
the collar outward to release the lamp
assembly.
Cut wires near lamp board
and strip back 1/4in. Connect stripped
wires to the replacement lamp,
following the yellow/blue polarity as
marked.
1
2
Make sure all wires are routed as
before, so as not to interfere with
proper assembly of the housing
onto the mounting plate. Re-
assemble the unit (see also step 5,
page 3).
NiCd Battery
Battery Strap
LiFePO4 Battery
Battery support
Release snaps
gently
Connector under
the PCB
Collar
collar button
Bezel
Carefully flex this edge free from collar button
Connect the lamp wires to the new
charger board, following the
yellow/blue polarity as marked.
Reconnect the battery and other
components (if included). For
insertion of PCB, insert right side of
PCB first, followed by left side
(click should be heard).
Replace the lamp assembly firmly
under the snaps on the collar, making
sure the lamp wires are not pinched.
Replace the bezel.
3
1
2
For Velcro strap: Release and reuse
