The installation and initial configuration process
consists of the following six main steps:
1. Choose a location
2. Prepare for the installation
3. Unpack the system
4. Install the system in the rack
5. Initialize the storage arrays and software:
Step 1 - Access the Service Menu
a. Connect a laptop to the Service Port with an Ethernet cable.
b. Update the laptop's IPv4 Ethernet settings (TCP/IPv4
address: 10.17.21.200 and Subnet mask: 255.255.255.0).
c. Create an SSH connection to the DXi using 10.17.21.1
and log in using the default
ServiceLogin
password.
Step 2 - Perform Pick to Order Configuration
6. Perform the initial configuration:
Step 1 - Access the DXi GUI
Step 2 - Complete the Getting Started Wizard
Step 3 - Connect the Ethernet Cables Used for
Management, NAS, Application Specific, OST, and
Replication
Step 4 - Install the Bezel
Step 5 - Additional System Configuration
Installing and Initially Configuring the System
6-68870-01 Rev B
©2020 Quantum Corporation. All rights reserved.
Page 2
*6-68870-01*
Detailed installation and initial configuration instructions are available in the
DXi9000 Series Service Documentation
Center
by going to
Install > DXi Series System Installation
and then selecting your DXi9000 Series model.
For safety information, go to
Resources > Safety Information
in the
DXi9000 Series Service Documentation Center.
Service port
Service laptop
Node
Ethernet
cable
Refer to the
DXi9000 Series Service Documentation Center
for detailed instructions on the following:
Software Upgrade:
Verify that the DXi is up-to-date with
the latest software by clicking the
Software Upgrade
link
on the Home page.
Configuration Wizards:
Start configuring NAS, Application
Specific, VTL, OST, and replication, users, email alerts, and
support items by clicking the
Wizards
button on the main
menu.
DXi Best Practice Guides:
Click the
Best Practices Guide
button on the GUI to access guides that describe how to
integrate the DXi with key backup applications.
Cloud-Based Analytics (CBA) Configuration:
1. Enable and configure CBA in the DXi GUI by going to
Wizards > Support
or
Configuration > System > CBA
.
Software Upgrade link
Configuration Wizards button
Best Practices Guide button
