Quantum DXi6902, Field Service Manual

Page: 146 / 242

Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Replacing the Node Integrated Storage Controller
122 Quantum DXi6902 User’s Guide
2 Connect to the system node via the iDRAC port and launch the
Virtual Console Viewer (see Connecting to the System Node Using
the iDRAC Port on page 31).
3 Boot the system.
4 During the boot process, press < Ctrl+R> when prompted to enter
the PERC H710 RAID controller BIOS.
5 In the RAID BIOS, navigate to the VD Mgmt screen and select PERC
H710 Mini in the list (see Figure 70 ).
Note: Some of the following illustrations show a PERC H700
controller instead of a PERC H710. The procedure is the
same for both.
Figure 70 PERC RAID BIOS -
Virtual Disk Management
6 Press F2 to display the operations menu, and then select Security
Key Management > Create Key (see Figure 71 ).