Chapter 7: Status
VTL Status
Quantum DXi6900 User’s Guide
187
Slot
The slot where the cartridge is located.
Barcode
The barcode of the cartridge.
WP
The write protect status of the cartridge.
Capacity
The capacity of the cartridge.
Used
The amount of space on the cartridge currently used to store data. The value for
Used
might
be less than the original, native (raw) data size because the data is compressed before it is
written to the media.
Used Percent
The amount of currently used space on the cartridge expressed as a percentage of the total
capacity
( [ Used / Capacity ] x 100 ).
l
Click a cartridge to view detailed information about the cartridge.
l
When the storage system is degraded, all tape cartridges are shown in a degraded state.
l
When the storage system has failed or is inaccessible due to failure, all tape cartridges are shown as
unavailable.
Logical View
Use the
Logical View
page to view information about the virtual (logical) components in a VTL partition.
You can also view information about used space in the partition.
To access the
Logical View
page, on the
VTL Status
page, click the
Logical View
).
Figure 119:
Logical View Page
