Installing Components in the DXi6900 Node
Quantum DXi6900 Installation Guide
31
3. Holding the network card by its edges, position the card so that the connector on the card aligns with the
expansion card connector on the riser.
4. Insert the card-edge connector firmly into the expansion card connector until the card is fully seated.
5. Push the expansion card latch down to lock the card in place.
6. (Optical 10 GbE option only) Insert an SFP+ unit into each 10 GbE port on the X520 card. (The SFP+
units are included with the optional 10 GbE network card.)
Closing the Node Cover
To close the DXi6900 Node cover:
1. Lift the latch on the cover (see
).
Figure 22:
Replacing the Node Cover
1
2
3
1. Latch release lock 2. Latch 3. Node cover
2. Place the cover onto the Node chassis and offset the cover slightly back so that it clears the chassis
hooks and lays flush on the chassis.
3. Push down the latch to move the cover into the closed position.
4. Rotate the latch release lock in a clockwise direction to secure the cover.
