Chapter 3: FRU Removal and Replacement Procedures
Replacing Node Memory Modules
Quantum DXi6900 G2 Field Service Manual
85
Turning On the DXi6900 G2 on page 22
).
5. In the remote management console, delete any administrative alerts and close any service tickets.
Replacing Node Memory Modules
This section describes how to remove and replace memory modules in the DXi6900 G2 Node and contains
the following sections:
l
Obtaining a Replacement Node Memory Module below
l
Replacing a Node Memory Module below
Obtaining a Replacement Node Memory Module
Before beginning the replacement procedure, make sure that you have the required replacement kit. The
appropriate replacement memory module will be provided by Quantum Customer Support (see
).
You will need the following items to perform this procedure:
l
Replacement memory module kit provided by Quantum Customer Support.
l
ESD grounding wrist strap (included in the replacement kit)
Figure 46:
DXi6900 G2 Node Memory Module
Illustration
Description
Replacement memory module (16 GB DIMM)
Replacing a Node Memory Module
This section describes how to remove and replace a memory module in the DXi6900 G2 Node.
Caution:
Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
Removing and replacing a memory module in the Node includes the following steps:
l
Identifying Node Memory Locations on the next page
l
