Quantum DXi6900-S, Installation Manual

Page: 21 / 71

Installing the DXi6900-S System in the Rack
Quantum DXi6900-S Installation Guide 21
Installing the DXi6900-S System in the Rack
Installing the DXi6900-S in a rack consists of the following steps:
l
Determining the Order of the Components in the Rack below
l
Locating the Mounting Position on the next page
l
Installing the DXi6900-S Array Module or Expansion Module on page 23
l
Installing the DXi6900-S Node on page 25
l
Cabling the DXi6900-S on page 28
Determining the Order of the Components in the Rack
Component Installation Recommendations
To make it easier to correctly cable the system, and for safety reasons, follow these recommendations
when installing the DXi6900-S system in the rack:
l
A rack is not included with the DXi6900-S. A standard 40U rack can be ordered from Quantum as an
optional purchase.
l
Figure 12 on the next page shows the recommended rack configuration for a maximum capacity
DXi6900-S configuration.
l
When installing components, start with the lowest Array or Expansion module in the configuration,
and then proceed upward in the rack as you add additional components. This will prevent the rack
from becoming overbalanced.
l
Make sure to leave enough space in the rack for future system expansion. The DXi6900-S can be
expanded to a maximum configuration requiring 18U of rack space.