Chapter 1: Basic Operations
DXi6900-S Node
Quantum DXi6900-S Field Service Manual
8
LED Indicator
Activity
Drive activity indicator (green)
l
Flashing
- Indicates hard disk drive activity.
Drive status indicator (green and amber)
l
Off
- Drive ready for insertion or removal
Note:
The drive status indicator remains off until
all drives are initialized after system power is
applied. Drives are not ready for insertion or
removal during this time.
l
Blinks green two times per second
- Identify
drive/preparing for removal
l
Blinks green, amber, and off
- Drive predicted
failure
l
Blinks amber four times per second
- Drive failed
l
Blinks green slowly
- Drive rebuilding
l
Steady green
- Drive online
l
Blinks green three seconds, amber three
seconds, and off six seconds
- Rebuild aborted
Note:
If a drive fails, you will be notified by a service ticket in the remote management console.
Caution:
Do
not
remove a drive that has
not
failed. Instead, only remove a drive that has failed. If you
accidentally remove a good drive, wait 30 seconds before reinserting the drive.
Figure 3:
DXi6900-S Solid State Drive Carrier LEDs
1 - Drive activity indicator (green) 2 - Drive status indicator (green and amber)
Node 1 GbE Ethernet Port Indicators
Each 1 GbE Ethernet port on the DXi6900-S Node rear panel has two LED indicators (see
