Installing the DXi6701 or DXi6702 System
19
DXi6701/DXi6702
Installing the Expansion Module Chassis
1
Install expansion module chassis onto the extended inner rack mounting rails.
Secure the chassis to the front of the rack with two Phillips screws (included on the
rack rails) on each side of the chassis (see
).
Caution:
Quantum recommends that you do not remove the hard drives from
the chassis. If they have been removed for any reason during or after
the installation, you MUST install the hard drives in the same position in
which they were removed. Refer to the
DXi6701 and DXi6702 Drive
Slot Serial Number Map
, which is included with the system for proper
hard drive positions.
Figure 12 Installing the
Expansion Module Chassis
Caution:
Ensure that all hard drive latches are completely closed.
DXi6701/DXi6702
Expansion chassis
installed
Expansion module chassis
Expansion module
chassis
Inner rails extended
and locked
