Quantum DXi4701 User Manual Download Page 71

Page: 71 / 440

Quantum DXi4701 User’s Guide

Chapter 3

DXi4701 Remote

Management

The Quantum DXi4701 provides a powerful Web-based user interface

that allows you to configure and manage the system from a remote

workstation on the same network as the DXi4701.

Note:

Management pages and information related to VTL (virtual

tape library) and Fibre Channel status and configuration display

only for DXi4701 VTL configurations. Similarly, management

pages and information related to NAS (network attached

storage) and OST (OpenStorage technology) display only for

DXi4701 NAS configurations.

Use the DXi4701 remote management console to perform the following

tasks:

• Set up the DXi4701 using guided procedures (see

DXi4701

Configuration Wizards

on page 57).

• View important system information at a glance (see

DXi4701 Home

Page

on page 101).

• Manage data replication activities (see

DXi4701 Replication

page 113).

• Monitor system performance (see

DXi4701 Status

on page 165).

• View administration alerts and resolve service tickets (see

DXi4701

Alerts

on page 193).

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands