Quantum DXi4701 User Manual Download Page 50

Page: 50 / 440

Chapter 2: DXi4701 Basic Operations
DXi4701 Node

Quantum DXi4701 User’s Guide

Note:

Usable storage capacity can be upgraded at any time after

purchase by adding a storage capacity upgrade license to

enable installed hardware capacity, or by adding additional

hardware capacity to the system. For information about

upgrade options, see the

DXi4701 Capacity Upgrade Guide

(6-68107), or contact your Quantum sales representative.

The DXi4701 Node has a series of LED indicators and buttons located on

the front and back of each component:

•

DXi4701 Node Front Panel Features and Indicators

•

DXi4701 Node Rear Panel Features

•

DXi4701 Node Ethernet Port Indicators

•

DXi4701 Node 10GbE Ethernet Port Indicators

•

DXi4701 Node Power Supply Indicators

DXi4701 Node Front

Panel Features and

Indicators

Figure 10

shows the controls, indicators, and connectors located behind

the optional rack bezel on the front panel of the DXi4701 Node.

Table 1

describes each item.

Figure 10 DXi4701 Node -
Front View

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands