Quantum DXi4701 User Manual Download Page 373

Page: 373 / 440

Chapter 9: DXi4701 Configuration

Notifications

Quantum DXi4701 User’s Guide

347

•

Warning

- Sends warning traps.

•

Informational

- Sends informational traps.

•

Available

- Sends a trap when the system transitions from an

unavailable to an available state.

•

Unavailable

- Sends a trap when the system transitions from an

available to an unavailable state.

Click

Apply

Editing a Destination

Edit an SNMP destination to change the name of the destination or the

types of traps the DXi4701 sends to the destination.
To edit a destination:

Click

Edit

The

Edit Trap Destination

page displays (see

Figure 190

Figure 190 Edit Trap
Destination Page

Enter information about the destination:

Note:

If you are editing a destination, you cannot change the

Address

•

IP Address

- (Optional) Select a different destination to edit.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands