Quantum DXi4701, User Manual

Page: 345 / 440

Chapter 9: DXi4701 Configuration
System
Quantum DXi4701 User’s Guide 319
Backpanel Locations
The
Backpanel Locations
section at the bottom of the
Network
page
displays a graphical representation of the Ethernet ports as they appear
on the rear of the system (see Figure 173 ).
The diagram indicates the current bonding configuration and
connectivity status for all Ethernet ports.
• Ports that are bonded together in an interface are shaded the same
color.
• A green border indicates a port is connected to a network.
• A red border indicates a port is configured but is not connected to a
network.
• Click
Update Port View
to update the information on the diagram.
Figure 173 Network Page:
Backpanel Locations
Date & Time
The Date & Time page allows you to set the system date and time of the
DXi4701. You can specify a Network Time Protocol (NTP) server to
synchronize the system time with, or you can manually enter the date
and time.
Caution: Changing the date and time settings requires a system
reboot immediately after the changes are applied. Wait for
at least 15 minutes before logging back in.
Note:
If you intend to join the DXi4701 to a Windows network using
Active Directory for NAS storage, Quantum recommends using
an NTP Server to set the system date and time (see Windows
Domain on page 211).