Quantum DXi4701, User Manual

Page: 270 / 440

Chapter 9: DXi4701 Configuration
VTL
244 Quantum DXi4701 User’s Guide
To edit a host access group:
1 Select the group and click Edit .
The Edit Remote Host Mapping page displays (see Figure 135 ).
Note: If you are editing a host access group, you cannot change
the Group Name , Partition , Host , or Target .
Figure 135 Edit Remote Host
Mapping Page
2 (Optional) Select the Use CCL check box to use the Command and
Control LUN.
Note: The CCL (Command and Control LUN) is not used in most
environments. This option is recommended for host access
groups that contain an HP-UX host. It can also be used if
hosts that are not assigned to any host access group exist
in the SAN. The CCL is accessible to hosts only through LUN
0.
Caution: If you are not sure if you should use CCL, contact
Quantum Customer Support before you enable this
option.
3 Select the check boxes for the media changer and tape drives to add
to the host access group.