Quantum DXi4701, User Manual

Page: 267 / 440

Chapter 9: DXi4701 Configuration
VTL
Quantum DXi4701 User’s Guide 241
devices in the partition using different host LUNs on the port. To allow
multiple hosts to access devices that belong to the same partition, you
must create separate host access groups for each host.
To access the
Remote Host Mapping page, on the Remote Host Access
page, click the Remote Host Mapping tab (see Figure 133 ).
Figure 133 Remote Host
Mapping Page
Use the Remote Host Mapping page to perform the following tasks:
• View information about existing host access groups (see Remote
Host Mapping And Groups on page 241).
• Add a new host access group to a partition (see Adding a Remote
Host Access Group on page 242).
• Edit properties for an existing host access group (see Editing a
Remote Host Access Group on page 243).
• Delete a host access group from a partition (see Deleting a Remote
Host Access Group on page 245).
Remote Host Mapping And Groups
The Remote Host Mapping And Groups section displays the following
information for all host access groups on the DXi4701:
• Group Name - The name of the group.
• Remote Host - The host (initiator) associated with the group.