Quantum DXi4701 User Manual Download Page 213

Page: 213 / 440

Chapter 7: DXi4701 Status

VTL Status

Quantum DXi4701 User’s Guide

187

To access the

Performance View

page, on the

VTL Status

page, click

the

Performance View

tab (see

Figure 104

Figure 104 Performance View
Page

The

Partition Throughput

section displays the following information

about VTL partitions:

•

Partition

- The name of the partition.

Click the partition name to display the tape drives in the partition.

Click a tape drive to see individual performance information for that

drive.

•

Performance (write)

- The average write speed to the partition in

MB/s.

Note:

Click the

Information

button

[i]

next to a partition to display

detailed information about the partition. Click a tape drive to

view detailed information about the drive.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands