Quantum DXi4701 User Manual Download Page 158

Page: 158 / 440

Chapter 6: DXi4701 Replication
Replication Send

132

Quantum DXi4701 User’s Guide

Click

Queue

The Directory/File or Cartridge Based Replication Queue displays (see

Figure 70

Figure 70 Directory/File or
Cartridge Based Replication
Queue

The Directory/File or Cartridge Based Replication Queue displays the

following information for the share or partition:

•

File/Directory or Barcode

- The file/directory or cartridge to be

replicated.

•

State

- The replication state for the file/directory or cartridge.

•

Progress

- The percentage complete for replication of the file/

directory or cartridge.

•

Estimated Duration

- The estimated time it will take to

complete replication for the file/directory or cartridge.

Note:

The estimated duration may display as

unknown

replication has been very recently initiated. After the

system has enough information to calculate a value,

the estimated duration will display.

Note:

The contents of the Directory/File or Cartridge Based

Replication Queue are dynamic. Because of this, statistics

are subject to change if items are added to the queue.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands