Quantum DXi4701, User Manual

Page: 157 / 440

Chapter 6: DXi4701 Replication
Replication Send
Quantum DXi4701 User’s Guide 131
Caution: Before synchronizing a share or partition, make sure all
media are unmounted and there are no active backup jobs
to the share or partition. (After the synchronization reaches
the Replicating state, backup jobs are allowed.)
Note: Even when replication is paused, the system continues to
queue Directory/File or Cartridge Based Replication operations.
Each time an operation is queued, the system logs an
administration alert that reports the total number of queued
Directory/File or Cartridge Based Replication requests.
Note: If a synchronization fails, make sure the target share or
partition is unlocked (see Configuring a Target Share for
Directory/File Based Replication on page 144 or Configuring a
Target Partition for Cartridge Based Replication on page 158).
To synchronize a share or partition:
1 Select the share or partition to synchronize.
If multiple targets are configured, click the arrow next to the share
or partition to display all targets, and then select the desired target.
2 Click Synchronize Now .
The status of the synchronization job displays in the Job Status column.
To cancel the synchronization job, select the share or partition and click
Abort .
Directory/File or
Cartridge Based
Replication Queue
The Directory/File or Cartridge Based Replication Queue displays
replication statistics for shares or partitions that are configured for
Directory/File or Cartridge Based Replication (see Configuring Directory/
File or Cartridge Based Replication on page 127).
To view the Directory/File or Cartridge Based Replication Queue:
1
Select a share or partition that is configured for Directory/File or
Cartridge Based Replication.
If multiple targets are configured, click the arrow next to the share
or partition to display all targets, and then select the desired target.