Quantum DXi4701, User Manual

Page: 133 / 440

Chapter 5: DXi4701 Home Page
Replication Overview
Quantum DXi4701 User’s Guide 107
Send Settings &
Cumulative Statistics
The Send Settings & Cumulative Statistics section displays statistics
for all data sent from the system since system installation or since Send
cumulative replication statistics were last cleared by clicking Clear Send
on the Replication Actions page (see Replication Performance on
page 163).
• Target DXis - The IP address and replication status for each
configured replication target (up to two). Click to specify a
replication target (see Replication Configuration on page 249).
• Ready - (Green) The system is ready to perform replication.
• In Progress - (Blue) A replication job is currently in progress.
• Queued - (Blue) A replication job is queued and will continue
when the system is ready.
• Partial - (Yellow) A replication job was partially completed.
Generate a replication report to see the files that were not
replicated (see Reports on page 163).
• Manually Paused - (Yellow) Replication was manually paused.
To resume replication, click Resume .
• System Paused - (Yellow) The system has automatically paused
replication due to a problem, for example, low disk space or a
problem on the target system.
To see more information about the problem that occurred, click
Admin at the top of the remote management console to view
administration alerts (see Admin Alerts on page 193). You may
also need to view alerts on the target DXi. In addition, make
sure that the DXi is an allowed replication source on the target
DXi (see Replication Configuration on page 249).
• Failed - (Red) A replication job was not completed.
• Internal Error - (Red) An error occurred during replication.
• Pause/Resume - The source DXi controls the replication pause
behavior. To manually pause replication between the source and
target, click Pause on the source DXi. To manually restart
replication, click Resume on the source DXi.