Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide
280
Figure 174:
On Demand Page
Tasks
Use the
On Demand
page to perform the following tasks:
Manually send a status data or configuration data report (see
).
View a configuration data report (see
Viewing Configuration Data below
).
Sending a Report
To manually send a status data or configuration data report:
1. Under
Email Type
, select the type of report to send (
Status data
or
Configuration data
).
2. In the
Send To
box, enter the e-mail address of the recipient.
3. Click
Send
.
Viewing Configuration Data
To view a configuration data report:
1. Under
Email Type
, select
Configuration data
.
2. Click
View
.
The
System Configuration Report
window displays.
3. (Optional) Click
Save
to save a local copy of the report in TXT format.
SNMP
The
SNMP
page allows you to configure the DXi4700 to send status messages using SNMP (Simple
Network Management Protocol). The DXi4700 supports SNMP v1 and v2c.
SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network, or
communities. SNMP compliant devices, called agents, store data about themselves in Management
Information Bases (MIBs) and return this data to the SNMP requesters.
You can configure the DXi4700 to act as an agent and send traps to a specified destination. You can also
add SNMP community information.
