Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide
278
Specify a return address that lets you easily identify the system that generated the e-mail (for example,
). The return address must contain an @ symbol and a valid domain
name, including a period.
3. (Optional) Select the
Enable Admin Alerts about Email Server not configured
check box to have
system generate administration alerts to notify you if an e-mail server is not configured.
4. (Recommended) Select the
Enable automatic emails to Quantum
check box to periodically send
system configuration and status information to Quantum, including any software upgrades you have
installed using the
Software Upgrade Utility
. Quantum Support can use this information to provide a
better support experience in the future.
Note:
Automatic e-mails contain configuration and status information only, and do not contain any
customer data stored on the system.
5. Click
Apply
.
Test
The
Email Test
page allows you to send a test e-mail to verify that e-mail notifications are correctly
configured on the DXi4700.
To access the
Email Test
page, on the
page, click the
Test
).
Figure 172:
Email Test Page
To send a test e-mail, select a recipient in the list and click
Send
. If the recipient does not receive the e-mail,
make sure that the recipient's e-mail address is correct (see
Editing an E-mail Recipient on page 275
). Also
make sure that the outgoing e-mail server is correct (see
).
Email Reports
The
Email Reports
page allows you to specify the e-mail recipients for automatically generated reports.
You can also generate reports on demand.
