Chapter 9: Configuration
OST Configuration
Quantum DXi4700 User’s Guide
246
Remote
Storage
Server
Name
The name of the remote storage server (on the target DXi) to replicate data to. The source DXi
and target DXi must reside in different NetBackup domains.
Note:
To configure the target DXi, see
.
Remote
LSU
Name
The name of the LSU in the remote storage server that will receive the replicated data.
Remote
User
The OST user credentials to use for authentication on the remote (target) DXi. The selected
remote user
must
match a local user on the
Configuration > OST > Manage Users
page on
).
6. Click
Apply
.
Deleting an LSU
Delete an LSU if it is no longer needed. When you delete an LSU, all data stored on the LSU is lost.
Note:
If you deleted the LSU from Veritas NetBackup or Veritas Backup Exec, you must wait several
minutes before deleting the LSU from the DXi4700.
To delete an LSU:
1. Select the LSU in the
Logical Storage Unit List
.
You cannot delete an LSU if it has more than zero currently active connections. The number of active
connections is displayed on the
LSU
Logical Storage Unit List on page 241
).
Note:
You can select multiple LSUs to delete at once.
2. (Optional) Select the
Force Delete LSU
check box to delete LSUs that are not empty.
Normally, you cannot delete an LSU if it contains existing backup images. If for some reason you cannot
remove files from the LSU, selecting the
Force Delete LSU
check box allows you to delete the LSU
even though it is not empty.
3. Click
Delete
.
Manage Remote Users
The
Manage Remote Users
page allows you to create and manage remote users for use with OST
Automatic Image Replication (AIR). You must configure at least one remote user before you can enable
Automatic Image Replication for an LSU (see
). When using OST Automatic
Image Replication (AIR), the remote user credentials specified on the source DXi must match the local user
credentials on the target (remote) DXi.
To access the
Manage Remote Users
page, on the
OST
page, click the
Manage Remote Users
tab (see
).
