Chapter 9: Configuration
OST Configuration
Quantum DXi4700 User’s Guide
234
3. On the target system, create a storage server and LSU to receive the replicated OST data (see
).
Note:
Quantum recommends selecting the
Available Capacity
option when creating an LSU for
use with Automatic Image Replication.
4. On the source system, specify the target system that will receive the replicated data (see
Replication Target on page 255
).
5. On the source system, create a remote OST user with the same user name and password that you used
Manage Remote Users on page 246
).
Caution:
On the source system, make sure to create a
remote
user on the
Configuration > OST
> Manage Remote Users
page.
6. On the source system, create a storage server and LSU, and enable the LSU for Automatic Image
Adding a Storage Server on page 236
).
For
Remote Storage Server
and
Remote LSU
, make sure to specify the storage server and LSU
created in step 3 above. Also, for
Remote User
, make sure to select the remote user created in step 5
above.
7. Configure storage lifecycle policies in NetBackup to control when automatic replication of the LSU
occurs (see the
Veritas NetBackup Administrator's Guide
).
Figure 150:
Setting Up OST Automatic Image Replication
Storage Servers
The
Storage Servers
page allows you to manage OST storage servers on the DXi4700. You can view
information about existing storage servers, add or edit storage servers, and delete storage servers.
To access the
Storage Servers
page, on the
OST
page, click the
Storage Servers
).
