Chapter 7: Status
VTL Status
Quantum DXi4700 User’s Guide
172
Figure 111:
Physical View Page
Use the controls in the
VTL Physical View Information
section to select the information to display:
1. Select the VTL to display in the
Partition
drop-down box.
2. Click
Hide Drives
or
Show Drives
to hide or show the virtual tape drives in the VTL (see
).
3. Click
Hide Storage Slots
or
Show Storage Slots
to hide or show the virtual storage slots in the VTL
).
4. Click
Hide I/E Slots
or
Show I/E Slots
to hide or show the virtual I/E slots in the VTL (see
).
Tape Drives
The
Tape Drives
section displays information about virtual tape drives in the VTL:
l
If a cartridge is mounted in the tape drive, the barcode of the cartridge displays beneath the drive.
l
Click a tape drive to view detailed information about the drive.
Storage and I/E Slots
The
Storage Slots
and I
/E Slots
sections displays information about the virtual cartridges located in the
storage and I/E slots:
The following information is displayed for each cartridge:
