Chapter 6: Replication
Receive NAS
Quantum DXi4700 User’s Guide
139
l
Manage shares configured for Directory/File Based Replication (see
).
Received Snapshots
The
Received Snapshots
page allows you to view and work with received snapshots. When a replicated
NAS share is received from a source system, it is saved as a snapshot. The snapshot contains all of the data
necessary to fully recover or failback the share to the point in time when the snapshot was saved.
To access the
Received Snapshots
page, on the
Receive NAS
page, click the
Received Snapshots
tab
).
Figure 87:
Received Snapshots Page
Tasks
Use the
Received Snapshots
page to perform the following tasks:
l
View information about received snapshots (see
Snapshots List on the next page
).
l
Recover a partition on the target system (see
Recovering a Share on the next page
).
l
Failback a partition to the source system (see
Performing a Failback For a Share on page 141
).
l
Delete a received snapshot (see
Deleting a Snapshot on page 143
).
Note:
The target system will retain up to 10 replication snapshots (default setting) for each replicated
partition. Once 10 snapshots have been saved, the oldest snapshot is deleted to make room for each
new snapshot that is received. (To change the maximum number of snapshots retained for each
partition, see
Changing the Maximum Number of Snapshots
).
