Quantum DXi4510, User Manual

Page: 48 / 292

Chapter 2: Basic Operations
Hard Drive Carrier Indicators
24 Quantum DXi4000 User’s Guide
• Blinks green three seconds, off three seconds, amber three
seconds, and off three seconds - Rebuild aborted
Note: If a drive fails, you will be notified by an admin alert in the
remote management console (see Admin Alerts on
page 127).
Caution:
All drives are hot swappable. When replacing drives,
never remove more than one drive at a time from a
RAID set. After removing a drive, first wait one minute.
Then insert a working drive and wait for the RAID set to
finish rebuilding (red indicator light is off) before
removing another drive. For information about RAID
sets, see Supported RAID Configurations on page 13.
Figure 9 Hard Drive Carrier
LEDs
Drive activity 
indicator (green)
Drive status 
indicator (green
and amber)