Quantum DXi4510, User Manual

Page: 46 / 292

Chapter 2: Basic Operations
DXi4000 System
22 Quantum DXi4000 User’s Guide
System Back Panel
Connectors
See the following subsections for information about the back panel
connectors available in each possible configuration:
Note:
Refer to the port numbering label on the back of the system to
help you determine the correct port connections.
Figure 8 shows the connectors located on the rear panel of the system.
Table 2 describes each item.
Figure 8 System Rear View
6 System identification
button
The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pushed, the LCD panel on the front and the blue
system status indicator on the back blink until one
of the buttons is pushed again.
7 USB connectors (2) Connects USB 2.0 compliant devices to the
system.
8 DVD-ROM DVD-ROM drive.
Item
Indicator, Button, or
Connector Icon Description
ST
1
3
2
1
2
Gb 2
Gb 1
2 3 4 5
1
2
3
6
4 5