Quantum DXi4510 User Manual Download Page 38

Page: 38 / 292

Chapter 1: DXi4000 System Description
DXi Advanced Reporting

Quantum DXi4000 User’s Guide

loss until the failed drive is rebuilt: the larger the hard drive, the longer

the rebuild will take and the longer the system is vulnerable to possible

data loss.
The DXi4000 uses RAID 6 volumes for data storage.

• The system contains the following RAID 6 set (

Figure 6

•

DATA

- HDD slots 1–8 (data storage)

Figure 6 DXi4000 RAID Sets

DXi Advanced Reporting

Quantum DXi Advanced Reporting works with all DXi-Series disk backup

systems. DXi Advanced Reporting combines comprehensive

performance data logging with powerful visual reporting and analysis

tools to help you identify potential problems and optimize system

operation. For more information, refer to the

DXi Advanced Reporting

Software and Documentation CD

included with your system.

HDD Slot 0

HDD Slot 2

HDD Slot 4

HDD Slot 6

HDD Slot 1

HDD Slot 3

HDD Slot 5

HDD Slot 7

Summary of Contents for DXi4510





































































































































































































































































































Search results

Summary of Contents for DXi4510

Reviews:

Related manuals for DXi4510

Brands by name

Popular brands

Quantum DXi4510, User Manual

Search results

Summary of Contents for DXi4510

Reviews:

Related manuals for DXi4510

Brands by name

Popular brands