manualshive.com logo in svg

Quantum DXi4510, User Manual

Share
Download
Quantum DXi4510 User Manual Download Page 253

Chapter 10: DXi4000 Utilities

Diagnostics

Quantum DXi4000 User’s Guide

229

•

End Time

 - The time the healthchecks ended.

Use the 

General

 page to perform the following tasks:

• To start all enabled healthchecks, click 

Start

.

• To stop all healthchecks in progress, click 

Stop

.

Status

The 

Status

 page allows you to view information about the most recent 

test results for each healthcheck. You can also enable or disable a 

healthcheck.
The following healthchecks are available:

•

De-Duplication

 - Checks the overall health of the blockpool. This 

healthcheck verifies that the metadata in the namespace file and the 

data tags in the blockpool are correctly in sync.

•

Integrity

 - Checks the integrity of data in the blockpool. This 

healthcheck examines a sample of data tags in the blockpool and 

verifies that the data has been properly stored without errors or 

corruption.

To access the 

Status

 page, on the 

Healthchecks

 page, click the 

Status

 

tab (see 

Figure 127

).

Figure 127  Status Page

Summary of Contents for DXi4510





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands