Quantum DXi4510, User Manual

Page: 235 / 292

Chapter 9: DXi4000 Configuration
Notifications
Quantum DXi4000 User’s Guide 211
• IP Address - The IP address of the destination.
• Name - The name of the destination.
• Selected Traps - The traps the DXi4000 sends to the destination
( Failure , Warning , Informational , Available , or Unavailable ).
Adding a Destination
Add an SNMP destination to send traps from the DXi4000 to the
destination.
Note: You can add up to 5 destinations.
To add a destination:
1 Click Add .
The Add Trap Destination page displays (see Figure 115 ).
Figure 115 Add Trap
Destination Page
2 Enter information about the destination:
• IP Address - Enter the IP address of the system that will receive
the traps generated by the DXi4000.