Quantum DXi4510, User Manual

Page: 233 / 292

Chapter 9: DXi4000 Configuration
Notifications
Quantum DXi4000 User’s Guide 209
• Manually send a status data or configuration data report (see
Sending a Report on page 209).
• View a configuration data report (see Viewing Configuration Data
on page 209).
Sending a Report
To manually send a status data or configuration data report:
1 Under Email Type , select the type of report to send ( Status data or
Configuration data ).
2 In the Send To box, enter the e-mail address of the recipient.
3 Click Send .
Viewing Configuration Data
To view a configuration data report:
1 Under Email Type , select Configuration data .
2 Click View .
The System Configuration Report window displays.
3 (Optional) Click Save to save a local copy of the report in TXT
format.
SNMP
The SNMP page allows you to configure the DXi4000 to send status
messages using SNMP (Simple Network Management Protocol). The
DXi4000 supports SNMP v1 and v2c.
SNMP works by sending messages, called protocol data units (PDUs), to
different parts of a network, or communities. SNMP compliant devices,
called agents, store data about themselves in Management Information
Bases (MIBs) and return this data to the SNMP requesters.
You can configure the DXi4000 to act as an agent and send traps to a
specified destination. You can also add SNMP community information.
To access the
SNMP page, on the Notifications page, click the SNMP
tab.
The
SNMP page contains the following tabs:
• Destinations