manualshive.com logo in svg

Quantum DXi4510, User Manual

Share
Download
Quantum DXi4510 User Manual Download Page 143

Chapter 7: DXi4000 Status

Hardware

Quantum DXi4000 User’s Guide

119

The subcomponent section displays the following information about the 

subcomponents in the selected component:

•

Component

  - The name of the subcomponent.

•

Location

 - The location of the subcomponent within the system.

•

Value

 - The value reported by the subcomponent.

•

Status

 - The status of the subcomponent.

•

Normal

 - (Green) The component is operating correctly.

•

Attention

 - (Yellow) There is a problem with the component .

•

Failed

 - (Red) The component has failed.

Firmware Version

The 

Firmware Version

 page allows you to view information about 

hardware components installed in the DXi4000, such as the firmware 

version, hardware revision, and manufacturer.
To access the 

Firmware Version

 page, on the 

Hardware

 page, click the 

Firmware Version

 tab (see 

Figure 66

).

Figure 66  Firmware Version 
Page

The 

Firmware Version

 page displays the following information:

Summary of Contents for DXi4510





































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands