Quantum DXi4510, User Manual

Page: 116 / 292

Chapter 6: DXi4000 Replication
Send NAS
92 Quantum DXi4000 User’s Guide
Note: To be eligible for replication, a share must have data
deduplication enabled at the time it is created.
To enable or disable replication for a share:
1 Select the share and click Edit .
The Edit NAS Share page displays (see Figure 50 ).
Figure 50 Edit NAS Share Page
2 Select the Enable replication check box to enable replication for
the share.
Or clear the
Enable replication check box to disable replication for
the share.
3 Click Apply .
Note: Quantum recommends scheduling replication to run after
backups are complete (see Configuring a Replication Schedule
For a Share on page 93). If you do not enable scheduled
replication, replication will only occur if you manually replicate
a share (see Replicating a Share on page 94) or if you configure
Directory/File Based Replication (see Configuring a Source Share
for Directory/File Based Replication on page 93).