Quantum DXi4500 User Manual Download Page 187

Page: 187 / 226

Chapter 9: DXi4500 Utilities

License Keys

Quantum DXi4500 User’s Guide

165

Note:

Shutting down the system can take up to 15 minutes. Only
the system will completely shut down.To completely shut
down all components, see

Turning On and Shutting Down

the System

on page 21.

License Keys

Use the

License Keys

page to display the license keys installed on the

system.

From the

Utilities

menu, click the

License Keys

tab.

The

License Keys

page displays (see

Figure 68

Figure 68 License Keys Page

Licenses

The following licenses are included with the DXi4500.

•

NAS

- Exposes NAS interface to host (License key is pre-installed on

all DXi4500 models.)

Summary of Contents for DXi4500



































































































































































































































Search results

Summary of Contents for DXi4500

Reviews:

Related manuals for DXi4500

Brands by name

Popular brands

Quantum DXi4500, User Manual

Search results

Summary of Contents for DXi4500

Reviews:

Related manuals for DXi4500

Brands by name

Popular brands