Preparing for the Installation
3
DXi3500 and DXi5500
Environmental Conditions
0
The installation site must have the following environmental conditions:
• Humidity: 20%-80% non-condensing
• Temperature: 10°C-35°C (50°F-95°F)
• Altitude: 0 to 10,000 feet (0 to 3048 meters)
These environmental conditions apply when the DX-Series system is in operation.
Preparing for the Installation
Before you begin the installation procedure in this section, make the following
preparations as described in this section:
•
•
Providing Necessary
Tools
0
Provide the following tools for unpacking and installing the DXi3500 and DXi5500
systems:
• #1 PHILLIPS® screwdriver
• #2 PHILLIPS screwdriver
• #1 Flat head screwdriver
• Antistatic wrist strap included in accessory kit
Taking ESD Precautions
0
Some components within the DXi3500 and DXi5500 systems contain static-sensitive parts.
To avoid damaging these parts while performing installation procedures, always observe
the following precautions:
• Keep the DXi3500/DXi5500 system turned off during all installation procedures.
• Use an antistatic wrist strap (included in the accessory kit).
• Keep static-sensitive parts in their original shipping containers until ready for
installation.
Weight
50 lbs (22.68 kg)
122 (55.34 kg)
Air Clearance
Open 4 in (10.2 cm) behind unit for proper air flow
Note:
For additional specifications, refer to the
Quantum DXi3500 and DXi5500 User’s
Guide
(PN 81-81701)
DXi3500
DXi5500
