Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-05 Rev B
April 2012
78
Network CLI Commands
Note:
The system does not automatically reboot; therefore, after making any
modification to your network configuration, you must manually reboot
the system. You can reboot the system using the syscli
--nodemanage
--reboot
command.
CLI command options:
•
--restore:
Restores previous custom network configuration.
•
--sure
: if specified, the command will execute and restart without asking for
confirmation.
Displaying System
Network Configuration
syscli --get network
This CLI allows the user to display the system network configuration.
--get:
Displays system network configuration.
Note:
The
--get network
command renders the
syscli
--query network
command unusable.
Listing Network
Interfaces
syscli --list interface [--xml [<filename>]] [--type [configured]|runtime]
This CLI allows the user to list available and configured network interfaces.
CLI Command Options:
•
--list:
Lists network interfaces.
•
--xml:
List XML output to screen or write XML output to <filename>.
•
--type:
Display interface's configured or runtime values. If this value isn't
specified, the configured values are displayed.
Adding Throttle on the
Source System
syscli --add throttle --service REP --bw <bandwidth><K|M>
This CLI allows the admin user to add throttling on the source for the specified
network services.
CLI Command Options:
•
--add:
Adds throttling on the source system.
•
--service:
Enables throttling for the specified service.
•
--bw:
The amount of bandwidth to throttle. For example, if 500Kb/s is
desired, enter
--bw 500K.
Deleting Throttle on the
Source System
syscli --del throttle [--service REP] [--sure]
This CLI allows the admin user to remove throttling on the source.
CLI Command Options:
