Quantum DXi V-Series Manual Download Page 134

Page: 134 / 140

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014

124

Status CLI Commands

Displaying the Time

Zone

syscli --list timezone [--matching <pattern>]

This CLI command allows the user to list information for all time zones. If

matching <pattern> is specified, list only time zones that have their time zone

filenames match the specified pattern such as pacific, central, bangkok, etc. The

match is case insensitive.

Status CLI Commands

The following sections describe the supported Status CLI commands:

•

Getting VTL Performance

•

Getting Tape Drive Status

•

Getting Storage Slot Status

•

Getting the VTL Logical View Status

•

Getting the Common Component Status

•

Getting Storage Array Status

•

Getting Hardware System Component Status

•

Getting System Board Status

•

Getting Network Port Status

•

Getting Detailed Storage Array Status

•

Getting System Memory Usage Statistics

Getting VTL

Performance

syscli --getstatus vtlperf --vtl <VTL_name>

This CLI command returns the VTL's average write speed.

Getting Tape Drive

Status

syscli --getstatus tapedrive --vtl <VTL_name> [--drive <drive>]

This CLI command returns the status of the tape drives of the specified VTL. An

optional drive can be specified using the serial number of the drive to show the

status of a specific drive.

Getting Storage Slot

Status

syscli --getstatus storageslot --vtl <VTL_name> [--barcode <barcode>]

This CLI command returns the status of the storage slots of the specified VTL. If

the optional barcode is specified, the status of the storage slot of the specified

barcode is displayed.

Summary of Contents for DXi V-Series













































































































































Search results

Summary of Contents for DXi V-Series

Reviews:

Brands by name

Popular brands

Quantum DXi V-Series, Manual

Search results

Summary of Contents for DXi V-Series

Reviews:

Brands by name

Popular brands