Checking for Tape Drive Errors | D4
D4
Checking for Tape Drive
Errors
The SDLT 600 tape drive (SCSI version) provides status and
event information about the SCSI controller, devices, data
transfer, and errors. The Fibre Channel version of the tape
drive also indicates whether a signal is present and provides
the Fibre Channel address, speed, topology, and node and
port information.
You can use iTalk to access this information through the tape
drive’s infrared port located on the front of the tape drive.
You can find iTalk on the CD-ROM that accompanies the
tape drive, or you can download it from
www.quantum.com/sdlt
(you must first register your tape drive on the web site).
See
iTalk’s online help for information about using the software.
