background image

Copyright © 2004 by Quantum Corporation. All rights reserved.

Quantum, the Quantum logo, and the DLTtape logo are trademarks of Quantum Corporation, registered in the U.S.A. 
and other countries. DLT, DLTtape, and Super DLTtape are trademarks of Quantum Corporation.

Other company and product names used in this document are trademarks, registered trademarks, or service marks 
of their respective owners.

This application note is to be used only as a guideline for the titled subject. The user assumes all responsibility for 
understanding the interrelationships of this information with other affected software or system products. Quantum 
Corporation provides this information as a service only, and assumes no responsibility for any damages which could 
result from the use of this information.

The information in this application note is subject to change without notice and is not to be construed as a 
commitment by Quantum Corporation. Quantum Corporation assumes no responsibility for any errors that may 
appear in this document.

Quantum

Application Note

Installing a DLTtape or Super DLTtape 

Drive into an AIX System

September 2004

6464181-01

1. Introduction ..........................................................................................3

1.1

Purpose and Scope .............................................................................................3

2. Installation ............................................................................................4

2.1

Before You Begin................................................................................................. 4

2.2

Installing the Tape Drive ......................................................................................5

3. Optional Attribute Settings..................................................................8

4. Special Device Files ...........................................................................10

5. Tape Cartridge Compatibility............................................................. 11

6. Using a DLTtape Mini-Library............................................................12

Summary of Contents for DLTtape DLT 4000













Reviews: