Quantum ATL PowerStor L200 Series, User Manual

Page: 96 / 106

Appendix B OCP Error Messages and Error Definitions
80 ATL PowerStor L200 Series Library User’s Guide
93H
Time-out attempting to find the pusher home position during a cartridge unload.
94H
Time-out while moving a cartridge from the drive onto the elevator. If this error occurs, the
loader controller will try to move the cartridge back into the drive.
Note that receipt of this error code implies the cartridge has been put back into the drive.
95H
Time-out while moving the elevator from the drive load position to the slot position during a
cartridge unloads.
The command can be retried by issuing a
SCAN MAGAZINE
command followed by reissuing
the
UNLOAD
command.
96H
Time-out finding
PUSHPOS 1
during a cartridge unload.
97H
Time-out while unloading a cartridge into a slot during a cartridge unload.
This error can also occur during an
EXTENDED SCAN MAGAZINE
command. If it does occur
during an
EXTENDED SCAN MAGAZINE
, it means a cartridge that was in the magazine, is
now on the elevator. To recover from this, a
SCAN MAGAZINE
should be issued followed by
an
UNLOAD
command.
98H
Time-out while attempting to find the pusher home position during a cartridge unload.
This error actually occurred after the cartridge was successfully placed back into the
magazine so the move is effectively completed.
99H
Time-out while moving the elevator to
DRIVPOS
during a cartridge unload.
This error can be retried by issuing a
SCAN MAGAZINE
followed by reissuing the
UNLOAD
command.
9AH
Time-out finding
PUSHPOS 2
during a cartridge unload command.
9BH
Could not unlock the door during an unlock door command.
9CH
Did not find all valid slot positions during a
SCAN MAGAZINE
command.
9DH
Time-out did not leave cartridge type window during a
SCAN MAGAZINE
command.
9EH
Time-out leaving
DRIVPOS
during a
SCAN MAGAZINE
command.
9FH
Could not lock the door during a door lock command or during a scan command if door is
unlocked.
A0H
Cartridge already in drive during a
Load Cartridge
command.
A1H
No cartridge in the selected slot during a
Load Cartridge
command.
A2H
Time-out while moving elevator to slot position during a
Load Cartridge
command.
This error can be retried by issuing a
SCAN MAGAZINE
command, followed by reissuing the
Load Cartridge
command.
A3H
Time-out attempting to find the
PUSHPOS 1
during a
Load Cartridge
command.
Error Code Description